FML (Prismatic) Single Phase and Three Phase archivos - Lifasa https://lifasa.com/en/productos/fml-prismatic-single-phase-and-three-phase/ Mon, 11 Jan 2021 14:44:20 +0000 en-US hourly 1 FMLF 7% https://lifasa.com/en/producto/fmlf-7/ Tue, 28 Aug 2018 10:35:25 +0000 http://lifasa.com/?post_type=avada_portfolio&p=4038 La entrada FMLF 7% se publicó primero en Lifasa.

]]>

Power Capacitor for Harmonic Protection FMLF 7%

These LIFASA capacitors are designed to be connected in series with INR or INA reactors, in order to build up low tuning (fr = 189 Hz) Harmonic Protection Filters (Capacitor rated powers indicated in the table, are achieved when connected to the reactors).

FMLF capacitors have been specially developed taking into account that, when connected to the reactors, they work at a voltage higher than the supply voltage. Inductance value of reactors and capacitance value of FMLF capacitors are specially calculated to ensure that, when connected in series, the reactive power of the filter is as given on the nameplate.

Rated voltage 460 V
Frequency 50 Hz – 60 Hz
Dielectric Polypropylene
Discharge resistors Fitted
Dielectric losses ≤ 0.2 W/kvar
Total losses ≤ 0.5 W/kvar
Max. Overvoltage 1.1Un (8 h/day)
Max. Overcurrent 1.3 In
Insulation level 3/15 kV
Power tolerance -5/+10%
Climatic range -40/ +55 ºC
Terminals M10
Colour RAL 7035
Standards IEC60831, EN 60831

Other powers, voltages and frequencies on request.

File Language Date Size
Datasheet 04/01/2019 0.1 MB
Manual 04/01/2019 0.06 MB

Contact us if you need more information

[contact-form-7]

La entrada FMLF 7% se publicó primero en Lifasa.

]]> MFB https://lifasa.com/en/producto/mfb/ Mon, 27 Aug 2018 11:18:08 +0000 http://lifasa.com/?post_type=avada_portfolio&p=3763 La entrada MFB se publicó primero en Lifasa.

]]>

Compact three-phase power capacitor

Self-healing capacitors with low losses metallized polypropylene dielectric without liquid impregnants. Mounted in rectangular sheet steel plate enclosure having discharge resistors connected to the terminals, which are protected by the cover.

These capacitors are especially suitable for the individual compensation of inductive loads and the construction of capacitor banks.

Rated Voltage 230 … 690V
Frequency 50 Hz – 60 Hz
Dielectric Polypropylene
Discharge resistors Fitted
Dielectric losses ≤ 0.2 W/kvar
Total losses ≤ 0.5 W/kvar
Max. Overvoltages 1.1 Un
Max. Overcurrent 1.3 In
Insulation level 3/15 kV
Power tolerance -5 / +10%
Climatic range – 40/ +55ºC
Connection M6
Protection degree IP41
Colour RAL 7035
Standards IEC 60831, EN 60831

Other powers, voltages and frequencies on request.

File Language Date Size
Datasheet 04/01/2019 0.1 MB
Manual 04/01/2019 0.06 MB

PRISMATIC CAPACITOR TECHNOLOGY

LIFASA capacitors are manufactured using the most advanced technologies, coming from an in depth knowledge of the manufacturing process and also from very strict laboratory and R+D tests. The enormous experience in installations, acquired over many years, allow us to incorporate in the new design the necessary characteristics to optimize the use of the product. Capacitors are composed of capacitive elements wound from low loss polypropylene film. This dielectric is vacuum metallized, what gives it an excellent self-healing characteristic (MKP). Elements are covered with a thermo hardening resin of high dielectric properties and are not oil filled. Elements are connected to obtain the required reactive power and are mounted in steel cases. Void spaces between elements and the case are filled with a non-flammable, inert and non toxic material. Each element is individually protected. This construction system avoids any risk of explosion of the capacitor and meets all the tests specified in the IEC 60831-1 and IEC 60831-2 standards.

ADVANTAGES

  • Capacitors are dry type and consequently ecologically safe: there is no possibility of impregnating liquid leakage.
  • Losses are specially reduced: lower than 0.05% (< 0.5 W/kvar).
  • Capacitors are a self-healing type: in case of a dielectric breakdown, due for example, to a transient overvoltage, the self-healing mechanism vaporizes the metallic electrode around the breakdown point, allowing the capacitor to go on working normally.
  • Their weight and volume are very low, allowing them to be installed everywhere without problems.
  • Capacitors use strong terminals that guarantee a fast and safe connection.
  • Capacitors, cover with their different series, a wide range of power and voltages to satisfy the most varied requirements.

Contact us if you need more information

[contact-form-7]

La entrada MFB se publicó primero en Lifasa.

]]> FML https://lifasa.com/en/producto/fml/ Mon, 27 Aug 2018 11:17:46 +0000 http://lifasa.com/?post_type=avada_portfolio&p=3769 La entrada FML se publicó primero en Lifasa.

]]>

Standard Power Capacitor FML

Self-healing capacitors with low losses metallized polypropylene dielectric without  impregnant liquid. Mounted in rectangular sheet steel plate enclosure having discharge resistors connected to the terminals, which are protected by the cover.

These capacitors are especially suitable for the individual compensation of inductive loads and the construction of capacitor banks.

Rated voltage 230 … 1000 V
Frequency 50 Hz
Dielectric Polypropylene
Discharge resistors Built-in
Dielectric losses ≤ 0.2 W/kvar
Total losses ≤ 0.4 W/kvar
Maximum overvoltage 1.1 Un
Maximum overcurrent 1.3 In
Insulation level 3/15 kV rms
Power tolerance -5 / +10%
Climatic range – 40/ +55ºC
Connection M10
Degree of protection IP41
Colour RAL 7035
Standards IEC 60831, EN 60831

Other powers, voltages and frequencies on request.

File Language Date Size
Datasheet 04/01/2019 0.1 MB
Manual 04/01/2019 0.06 MB

PRISMATIC CAPACITOR TECHNOLOGY

LIFASA capacitors are manufactured using the most advanced technologies, coming from an in depth knowledge of the manufacturing process and also from very strict laboratory and R+D tests. The enormous experience in installations, acquired over many years, allow us to incorporate in the new design the necessary characteristics to optimize the use of the product. Capacitors are composed of capacitive elements wound from low loss polypropylene film. This dielectric is vacuum metallized, what gives it an excellent self-healing characteristic (MKP). Elements are covered with a thermo hardening resin of high dielectric properties and are not oil filled. Elements are connected to obtain the required reactive power and are mounted in steel cases. Void spaces between elements and the case are filled with a non-flammable, inert and non toxic material. Each element is individually protected. This construction system avoids any risk of explosion of the capacitor and meets all the tests specified in the IEC 60831-1 and IEC 60831-2 standards.

ADVANTAGES

  • Capacitors are dry type and consequently ecologically safe: there is no possibility of impregnating liquid leakage.
  • Losses are specially reduced: lower than 0.05% (< 0.5 W/kvar).
  • Capacitors are a self-healing type: in case of a dielectric breakdown, due for example, to a transient overvoltage, the self-healing mechanism vaporizes the metallic electrode around the breakdown point, allowing the capacitor to go on working normally.
  • Their weight and volume are very low, allowing them to be installed everywhere without problems.
  • Capacitors use strong terminals that guarantee a fast and safe connection.
  • Capacitors, cover with their different series, a wide range of power and voltages to satisfy the most varied requirements.

Contact us if you need more information

[contact-form-7]

La entrada FML se publicó primero en Lifasa.

]]> FML Z 60 Hz https://lifasa.com/en/producto/fml-z-60-hz/ Mon, 27 Aug 2018 11:16:05 +0000 http://lifasa.com/?post_type=avada_portfolio&p=3773 La entrada FML Z 60 Hz se publicó primero en Lifasa.

]]>

Standard Power Capacitor FML Z 60Hz

Self-healing capacitors with low losses metallized polypropylene dielectric without  impregnant liquid. Mounted in rectangular sheet steel plate enclosure having discharge resistors connected to the terminals, which are protected by the cover.

These capacitors are especially suitable for the individual compensation of inductive loads and the construction of capacitor banks.

Rated voltage 230 … 1000 V
Frequency 60 Hz
Dielectric Polypropylene
Discharge resistors Built-in
Dielectric losses ≤ 0.2 W/kvar
Total losses ≤ 0.4 W/kvar
Maximum overvoltage 1.1 Un
Maximum overcurrent 1.3 In
Insulation level 3/15 kV rms
Power tolerance -5 / +10%
Climatic range – 40/ +55ºC
Connection M10
Degree of protection IP41
Colour RAL 7035
Standards IEC 60831, EN 60831

Other powers, voltages and frequencies on request.

File Language Date Size
Datasheet 04/01/2019 0.1 MB
Manual 04/01/2019 0.06 MB

PRISMATIC CAPACITOR TECHNOLOGY

LIFASA capacitors are manufactured using the most advanced technologies, coming from an in depth knowledge of the manufacturing process and also from very strict laboratory and R+D tests. The enormous experience in installations, acquired over many years, allow us to incorporate in the new design the necessary characteristics to optimize the use of the product. Capacitors are composed of capacitive elements wound from low loss polypropylene film. This dielectric is vacuum metallized, what gives it an excellent self-healing characteristic (MKP). Elements are covered with a thermo hardening resin of high dielectric properties and are not oil filled. Elements are connected to obtain the required reactive power and are mounted in steel cases. Void spaces between elements and the case are filled with a non-flammable, inert and non toxic material. Each element is individually protected. This construction system avoids any risk of explosion of the capacitor and meets all the tests specified in the IEC 60831-1 and IEC 60831-2 standards.

ADVANTAGES

  • Capacitors are dry type and consequently ecologically safe: there is no possibility of impregnating liquid leakage.
  • Losses are specially reduced: lower than 0.05% (< 0.5 W/kvar).
  • Capacitors are a self-healing type: in case of a dielectric breakdown, due for example, to a transient overvoltage, the self-healing mechanism vaporizes the metallic electrode around the breakdown point, allowing the capacitor to go on working normally.
  • Their weight and volume are very low, allowing them to be installed everywhere without problems.
  • Capacitors use strong terminals that guarantee a fast and safe connection.
  • Capacitors, cover with their different series, a wide range of power and voltages to satisfy the most varied requirements.

Contact us if you need more information

[contact-form-7]

La entrada FML Z 60 Hz se publicó primero en Lifasa.

]]> FML (R460) https://lifasa.com/en/producto/fml-r460/ Mon, 27 Aug 2018 11:15:38 +0000 http://lifasa.com/?post_type=avada_portfolio&p=3778 La entrada FML (R460) se publicó primero en Lifasa.

]]>

Reinforced Power Capacitor FML (R460)

Self-healing capacitors with low losses metallized polypropylene dielectric without impregnant liquids. Mounted in rectangular sheet steel plate enclosure having discharge resistors connected to the terminals, which are protected by the cover.

These capacitors are specially designed for a harmonic level, which, even if low, is enough to produce overcurrents and overvoltages exceeding the maximum overload values allowed by the standards.

Rated voltages 400 / 460V
Frequency 50 Hz – 60 Hz
Dielectric Polypropylene
Discharge resistors Fitted
Dielectric losses < 0.2 W/kvar
Total losses < 0.5 W/kvar
Max. overvoltage 1.15 Un (400 V)
Max. overcurrent 1.3 In
Insulation level 3 kV rms / 15 kV crest
Power tolerance -5 / +10%
Temperature range – 40/ +55ºC
Connection terminals M10
Protection IP41
Colour RAL 7035
Standards IEC 60831, EN 60831

Other powers, voltages and frequencies on request.

File Language Date Size
Datasheet 04/01/2019 0.1 MB
Manual 04/01/2019 0.06 MB

PRISMATIC CAPACITOR TECHNOLOGY

LIFASA capacitors are manufactured using the most advanced technologies, coming from an in depth knowledge of the manufacturing process and also from very strict laboratory and R+D tests. The enormous experience in installations, acquired over many years, allow us to incorporate in the new design the necessary characteristics to optimize the use of the product. Capacitors are composed of capacitive elements wound from low loss polypropylene film. This dielectric is vacuum metallized, what gives it an excellent self-healing characteristic (MKP). Elements are covered with a thermo hardening resin of high dielectric properties and are not oil filled. Elements are connected to obtain the required reactive power and are mounted in steel cases. Void spaces between elements and the case are filled with a non-flammable, inert and non toxic material. Each element is individually protected. This construction system avoids any risk of explosion of the capacitor and meets all the tests specified in the IEC 60831-1 and IEC 60831-2 standards.

ADVANTAGES

  • Capacitors are dry type and consequently ecologically safe: there is no possibility of impregnating liquid leakage.
  • Losses are specially reduced: lower than 0.05% (< 0.5 W/kvar).
  • Capacitors are a self-healing type: in case of a dielectric breakdown, due for example, to a transient overvoltage, the self-healing mechanism vaporizes the metallic electrode around the breakdown point, allowing the capacitor to go on working normally.
  • Their weight and volume are very low, allowing them to be installed everywhere without problems.
  • Capacitors use strong terminals that guarantee a fast and safe connection.
  • Capacitors, cover with their different series, a wide range of power and voltages to satisfy the most varied requirements.

Contact us if you need more information

[contact-form-7]

La entrada FML (R460) se publicó primero en Lifasa.

]]> FMLI https://lifasa.com/en/producto/fmli/ Mon, 27 Aug 2018 11:14:48 +0000 http://lifasa.com/?post_type=avada_portfolio&p=3782 La entrada FMLI se publicó primero en Lifasa.

]]>

Single Phase Prismatic Capacitor FMLI

Self-healing single-phase capacitors with low loss metallized polypropylene dielectric capacitors mounted in rectangular sheet steel plate enclosure having discharge resistors connected to the terminals, which are protected by the cover.

They are suitable for the individual compensation of inductive loads.

Dielectric Polypropylene
Dishcarge Resistors Fitted
Dielectric losses ≤0,2W/kvar
Total losses ≤0,4 W/kvar
Max. Overvoltage 1,1 UN
Max. Overcurrent 1,3 IN
Isolation level 3/15 kV
Power tolerance – 5 / + 10 %
Climatic Range – 40 / D (55º Max)
Connection M10
Protection degree IP41
Standards IEC 60831
EN 60831

Other powers, voltages and frequencies on request.

File Language Date Size
Datasheet 19/11/2018 0.1 MB
Manual 19/11/2018 0.06 MB

PRISMATIC CAPACITOR TECHNOLOGY

LIFASA capacitors are manufactured using the most advanced technologies, coming from an in depth knowledge of the manufacturing process and also from very strict laboratory and R+D tests. The enormous experience in installations, acquired over many years, allow us to incorporate in the new design the necessary characteristics to optimize the use of the product. Capacitors are composed of capacitive elements wound from low loss polypropylene film. This dielectric is vacuum metallized, what gives it an excellent self-healing characteristic (MKP). Elements are covered with a thermo hardening resin of high dielectric properties and are not oil filled. Elements are connected to obtain the required reactive power and are mounted in steel cases. Void spaces between elements and the case are filled with a non-flammable, inert and non toxic material. Each element is individually protected. This construction system avoids any risk of explosion of the capacitor and meets all the tests specified in the IEC 60831-1 and IEC 60831-2 standards.

ADVANTAGES

  • Capacitors are dry type and consequently ecologically safe: there is no possibility of impregnating liquid leakage.
  • Losses are specially reduced: lower than 0.05% (< 0.5 W/kvar).
  • Capacitors are a self-healing type: in case of a dielectric breakdown, due for example, to a transient overvoltage, the self-healing mechanism vaporizes the metallic electrode around the breakdown point, allowing the capacitor to go on working normally.
  • Their weight and volume are very low, allowing them to be installed everywhere without problems.
  • Capacitors use strong terminals that guarantee a fast and safe connection.
  • Capacitors, cover with their different series, a wide range of power and voltages to satisfy the most varied requirements.

Contact us if you need more information

[contact-form-7]

La entrada FMLI se publicó primero en Lifasa.

]]>