LV Power Capacitors archivos - Lifasa https://lifasa.com/en/productos/lv-power-capacitors/ Mon, 08 Feb 2021 15:44:50 +0000 en-US hourly 1 POLB SHD https://lifasa.com/en/producto/9007/ Mon, 08 Feb 2021 15:43:23 +0000 https://lifasa.com/?post_type=avada_portfolio&p=9007 La entrada POLB SHD se publicó primero en Lifasa.

]]>

Power Capacitor POLB SHD

Heavy Duty (HD series) capacitors are designed to offer long time expectancy and outstanding performance with its higher electrical characteristics.

It is a self-healing capacitor with low losses metallized polypropylene dielectric, filled with inert gas N2.

They have an overpressure disconnection system which provides a high level of safety against internal defects cutting the 3 phases.

Capacitors are built in cylindrical aluminum cans, provided with a M12 stud for fixing and earthling. Connection is made by a terminal block with clamp type terminals.

Rated Voltage 230 … 440V
Frequency 50 / 60 Hz
Dielectric Polypropylene
Discharge Resistors Fitted
Dielectric losses ≤ 0.2 W/kvar
Total losses ≤ 0.4 W/kvar
Max. Overvoltage 1.1 Un
Max. Overcurrent 2 In
Transient overcurrent 400 In
Isolation level 3/- 8 kV rms
Power tolerance -5 / +10%
Climatic range – 40/ D (+60ºC)
Life expectancy 150.000 hours
Terminal Block Type A: 16 mm²; 3 Nm max.
Type B: 25 mm²; 3 Nm max.
Type C: 35 mm²; 3.7 Nm max.
Fixing Stud M12
Protection degree IP20

IP54 with hood up to Ø116mm
Standards IEC 60831, EN 60831, UL 810

UL Certification in progress

Remarks:
(1) Maximum current for 48 hours continuous operation. (Tested as per IEC 60831-1:2014 Clause 13).
(2) Maximum temperature as per IEC 60831-1:2014. Clause 4.1
40/D (60 ºC) Refers: 60 ºC Maximum punctual temperature.
45 ºC Highest mean temperature over any period of 24 h.
35 ºC Highest mean temperature over any period of a year.

Other powers, voltages and frequencies on request.

File Language Date Size
Datasheet 16/01/2020 0.1 MB
Manual 16/01/2020 0.06 MB

Contact us if you need more information

[contact-form-7]

La entrada POLB SHD se publicó primero en Lifasa.

]]> CPFVF/CPMVF https://lifasa.com/en/producto/cpfvf-cpmvf/ Tue, 28 Aug 2018 10:41:18 +0000 http://lifasa.com/?post_type=avada_portfolio&p=4043 La entrada CPFVF/CPMVF se publicó primero en Lifasa.

]]>

Power Capacitor with Protection Filter CPFVF & CPMVF

The capacitors CPFVF and CPMVF series are formed by a power capacitor and a reactor of harmonic protection filter with an automatic circuit breaker or high rupturing capacity fuses. These capacitors are specially designed for individual compensation of transformers in networks with an elevated harmonic level.

Construction options:

  • With manual circuit breaker and /ord earth leakage relay  (for CPFVF)
  • With earth leakage relay (for CPMVF)

Accessories:

  • Forced cooling
Rated voltage 440 V
Frequency 50 Hz – 60 Hz
Capacitors FMLF Series or POLB HD 7%
Filter type Low tuning (7%)
Resonance frequency 189 Hz
Reactors INA-INR Type
Construction Metal cabinet
Degree of protection IP20
Colour Grey (RAL 7035)
Installation Indoor
Assembly Floor mounting
Cables entry Top sides

Other powers, voltages and frequencies on request.

File Language Date Size
Datasheet 19/06/2020 0.1 MB

Contact us if you need more information

[contact-form-7]

La entrada CPFVF/CPMVF se publicó primero en Lifasa.

]]> FMLF 7% https://lifasa.com/en/producto/fmlf-7/ Tue, 28 Aug 2018 10:35:25 +0000 http://lifasa.com/?post_type=avada_portfolio&p=4038 La entrada FMLF 7% se publicó primero en Lifasa.

]]>

Power Capacitor for Harmonic Protection FMLF 7%

These LIFASA capacitors are designed to be connected in series with INR or INA reactors, in order to build up low tuning (fr = 189 Hz) Harmonic Protection Filters (Capacitor rated powers indicated in the table, are achieved when connected to the reactors).

FMLF capacitors have been specially developed taking into account that, when connected to the reactors, they work at a voltage higher than the supply voltage. Inductance value of reactors and capacitance value of FMLF capacitors are specially calculated to ensure that, when connected in series, the reactive power of the filter is as given on the nameplate.

Rated voltage 460 V
Frequency 50 Hz – 60 Hz
Dielectric Polypropylene
Discharge resistors Fitted
Dielectric losses ≤ 0.2 W/kvar
Total losses ≤ 0.5 W/kvar
Max. Overvoltage 1.1Un (8 h/day)
Max. Overcurrent 1.3 In
Insulation level 3/15 kV
Power tolerance -5/+10%
Climatic range -40/ +55 ºC
Terminals M10
Colour RAL 7035
Standards IEC60831, EN 60831

Other powers, voltages and frequencies on request.

File Language Date Size
Datasheet 04/01/2019 0.1 MB
Manual 04/01/2019 0.06 MB

Contact us if you need more information

[contact-form-7]

La entrada FMLF 7% se publicó primero en Lifasa.

]]> CAB https://lifasa.com/en/producto/cab/ Mon, 27 Aug 2018 13:43:32 +0000 http://lifasa.com/?post_type=avada_portfolio&p=3818 La entrada CAB se publicó primero en Lifasa.

]]>

Capacitor with fuse and contactor CAB

CAB series are formed by connecting a POLB or FML three-phase power factor correction capacitor to HRC fuses, contactor, fast discharge resistors and limiting inductances. Control can be done by an external signal through a terminal block or by an on/off switch included in the equipment.

These capacitors are specially designed for the individual compensation of transformers, hoisting motors equipments and motors with star/delta starter or electromagnetic brake.

Accessories: Automatic controller

Rated voltage 230 … 440 V
Frequency 50 Hz – 60 Hz
Capacitor (Type 1) POLB (only enclosure)
Capacitor (Type 0) FML
Discharge resistors Fitted
Max. overvoltage 1.1 Un
Max. overcurrent 1.3 In
Insulation level 3 kV rms / 15 kV cresta
Temperature range – 40/ +55ºC
Terminals M10
Colour RAL 7035
Standards of fuses IEC 269, IEC 60269-1
Standards IEC 60831, EN 60831

Other powers, voltages and frequencies on request.

File Language Date Size
Datasheet 07/01/2019 0.1 MB
Manual 07/01/2019 0.06 MB

Contact us if you need more information

[contact-form-7]

La entrada CAB se publicó primero en Lifasa.

]]> CPF https://lifasa.com/en/producto/cpf/ Mon, 27 Aug 2018 13:36:47 +0000 http://lifasa.com/?post_type=avada_portfolio&p=3812 La entrada CPF se publicó primero en Lifasa.

]]>

Capacitor with fuses CPF

CPF series are formed by connecting a FML capacitor to a group of high rupturing capacity fuses.

Its construction facilitates connection of the capacitor in installations where individual compensation of motors and transformers is required. It offers effective protection against short circuits.

Rated voltage 230 … 440V
Frequency 50 Hz – 60 Hz
Insulation level 3 kV rms/15 kV crest
Max. overvoltage 1.1 Un (8 h/day)
Max. overcurrent 1.3 In
Temperature range -40/+55 ºC
Installation Indoor
Fuses In<63 A: Type D0 In>63 A: Type NH
Rupture capacity of the fuses Type D0: 50 kA

Type NH: 120 kA
Colour RAL 7035
Standards for fuses IEC 60269
Standards for capacitors IEC 60831, EN 60831

Other powers, voltages and frequencies on request.

File Language Date Size
Datasheet 07/01/2019 0.1 MB
Manual 07/01/2019 0.06 MB

Contact us if you need more information

[contact-form-7]

La entrada CPF se publicó primero en Lifasa.

]]> CPM https://lifasa.com/en/producto/cpm/ Mon, 27 Aug 2018 13:29:52 +0000 http://lifasa.com/?post_type=avada_portfolio&p=3806 La entrada CPM se publicó primero en Lifasa.

]]>

Capacitor with breaker CPM

CPM series are formed by connecting a FML capacitor to an automatic circuit breaker.

Its construction facilitates connection of the capacitor in installations where individual compensation of motors and transformers is required. It offers secure protection against transients and permanent overloads.

Rated voltage 230/440 V
Frequency 50 Hz – 60 Hz
Insulation level 3 kV rms/15 kV crest
Max. overvoltage 1.1 Un (8 h/day)
Max. overcurrent 1.3 In
Temperature range -40/+55 ºC
Installation Interior
Breaking capacity in at 415V ≤125 A (MCB): 10 kA

>125 A (MCCB): 50 kA
Colour RAL 7035
Standards for capacitors IEC 60831, EN 60831

Other powers, voltages and frequencies on request.

File Language Date Size
Datasheet 07/01/2019 0.1 MB
Manual 07/01/2019 0.06 MB

Contact us if you need more information

[contact-form-7]

La entrada CPM se publicó primero en Lifasa.

]]> ELEFP https://lifasa.com/en/producto/elefp/ Mon, 27 Aug 2018 13:22:59 +0000 http://lifasa.com/?post_type=avada_portfolio&p=3801 La entrada ELEFP se publicó primero en Lifasa.

]]>

Single-Phase Cylindrical Capacitor ELEFP

Self-healing capacitor elements with low losses metallized polypropylene dielectric. Capacitors mounted in cylindrical  aluminium cans with M12 stud for fixing and earthing. Connection is made through fast-on 6.3 x 0.8 mm terminals.

The aluminium can is equipped with an overpressure disconnection device that acts in case of overloads.

Rated voltages 230 … 525 V
Frequency 50 Hz – 60 Hz
Dielectric Polypropylene
Isolation level 3 / – kV rms
Dielectric losses < 0.3 W/kvar
Max. overvoltage 1.1 Un
Max. overcurrent 1.3 In
Power tolerance -5 / +10%
Temperature range – 40/ +55ºC
Terminals 6.3 x 0.8 mm
Max. torque M12: 12 Nm
Standards IEC 60831, EN 60831, VDE0560-46/47

Other powers, voltages and frequencies on request.

File Language Date Size
Datasheet 04/01/2019 0.1 MB
Manual 04/01/2019 0.06 MB

Contact us if you need more information

[contact-form-7]

La entrada ELEFP se publicó primero en Lifasa.

]]> MFB https://lifasa.com/en/producto/mfb/ Mon, 27 Aug 2018 11:18:08 +0000 http://lifasa.com/?post_type=avada_portfolio&p=3763 La entrada MFB se publicó primero en Lifasa.

]]>

Compact three-phase power capacitor

Self-healing capacitors with low losses metallized polypropylene dielectric without liquid impregnants. Mounted in rectangular sheet steel plate enclosure having discharge resistors connected to the terminals, which are protected by the cover.

These capacitors are especially suitable for the individual compensation of inductive loads and the construction of capacitor banks.

Rated Voltage 230 … 690V
Frequency 50 Hz – 60 Hz
Dielectric Polypropylene
Discharge resistors Fitted
Dielectric losses ≤ 0.2 W/kvar
Total losses ≤ 0.5 W/kvar
Max. Overvoltages 1.1 Un
Max. Overcurrent 1.3 In
Insulation level 3/15 kV
Power tolerance -5 / +10%
Climatic range – 40/ +55ºC
Connection M6
Protection degree IP41
Colour RAL 7035
Standards IEC 60831, EN 60831

Other powers, voltages and frequencies on request.

File Language Date Size
Datasheet 04/01/2019 0.1 MB
Manual 04/01/2019 0.06 MB

PRISMATIC CAPACITOR TECHNOLOGY

LIFASA capacitors are manufactured using the most advanced technologies, coming from an in depth knowledge of the manufacturing process and also from very strict laboratory and R+D tests. The enormous experience in installations, acquired over many years, allow us to incorporate in the new design the necessary characteristics to optimize the use of the product. Capacitors are composed of capacitive elements wound from low loss polypropylene film. This dielectric is vacuum metallized, what gives it an excellent self-healing characteristic (MKP). Elements are covered with a thermo hardening resin of high dielectric properties and are not oil filled. Elements are connected to obtain the required reactive power and are mounted in steel cases. Void spaces between elements and the case are filled with a non-flammable, inert and non toxic material. Each element is individually protected. This construction system avoids any risk of explosion of the capacitor and meets all the tests specified in the IEC 60831-1 and IEC 60831-2 standards.

ADVANTAGES

  • Capacitors are dry type and consequently ecologically safe: there is no possibility of impregnating liquid leakage.
  • Losses are specially reduced: lower than 0.05% (< 0.5 W/kvar).
  • Capacitors are a self-healing type: in case of a dielectric breakdown, due for example, to a transient overvoltage, the self-healing mechanism vaporizes the metallic electrode around the breakdown point, allowing the capacitor to go on working normally.
  • Their weight and volume are very low, allowing them to be installed everywhere without problems.
  • Capacitors use strong terminals that guarantee a fast and safe connection.
  • Capacitors, cover with their different series, a wide range of power and voltages to satisfy the most varied requirements.

Contact us if you need more information

[contact-form-7]

La entrada MFB se publicó primero en Lifasa.

]]> FML https://lifasa.com/en/producto/fml/ Mon, 27 Aug 2018 11:17:46 +0000 http://lifasa.com/?post_type=avada_portfolio&p=3769 La entrada FML se publicó primero en Lifasa.

]]>

Standard Power Capacitor FML

Self-healing capacitors with low losses metallized polypropylene dielectric without  impregnant liquid. Mounted in rectangular sheet steel plate enclosure having discharge resistors connected to the terminals, which are protected by the cover.

These capacitors are especially suitable for the individual compensation of inductive loads and the construction of capacitor banks.

Rated voltage 230 … 1000 V
Frequency 50 Hz
Dielectric Polypropylene
Discharge resistors Built-in
Dielectric losses ≤ 0.2 W/kvar
Total losses ≤ 0.4 W/kvar
Maximum overvoltage 1.1 Un
Maximum overcurrent 1.3 In
Insulation level 3/15 kV rms
Power tolerance -5 / +10%
Climatic range – 40/ +55ºC
Connection M10
Degree of protection IP41
Colour RAL 7035
Standards IEC 60831, EN 60831

Other powers, voltages and frequencies on request.

File Language Date Size
Datasheet 04/01/2019 0.1 MB
Manual 04/01/2019 0.06 MB

PRISMATIC CAPACITOR TECHNOLOGY

LIFASA capacitors are manufactured using the most advanced technologies, coming from an in depth knowledge of the manufacturing process and also from very strict laboratory and R+D tests. The enormous experience in installations, acquired over many years, allow us to incorporate in the new design the necessary characteristics to optimize the use of the product. Capacitors are composed of capacitive elements wound from low loss polypropylene film. This dielectric is vacuum metallized, what gives it an excellent self-healing characteristic (MKP). Elements are covered with a thermo hardening resin of high dielectric properties and are not oil filled. Elements are connected to obtain the required reactive power and are mounted in steel cases. Void spaces between elements and the case are filled with a non-flammable, inert and non toxic material. Each element is individually protected. This construction system avoids any risk of explosion of the capacitor and meets all the tests specified in the IEC 60831-1 and IEC 60831-2 standards.

ADVANTAGES

  • Capacitors are dry type and consequently ecologically safe: there is no possibility of impregnating liquid leakage.
  • Losses are specially reduced: lower than 0.05% (< 0.5 W/kvar).
  • Capacitors are a self-healing type: in case of a dielectric breakdown, due for example, to a transient overvoltage, the self-healing mechanism vaporizes the metallic electrode around the breakdown point, allowing the capacitor to go on working normally.
  • Their weight and volume are very low, allowing them to be installed everywhere without problems.
  • Capacitors use strong terminals that guarantee a fast and safe connection.
  • Capacitors, cover with their different series, a wide range of power and voltages to satisfy the most varied requirements.

Contact us if you need more information

[contact-form-7]

La entrada FML se publicó primero en Lifasa.

]]> FML Z 60 Hz https://lifasa.com/en/producto/fml-z-60-hz/ Mon, 27 Aug 2018 11:16:05 +0000 http://lifasa.com/?post_type=avada_portfolio&p=3773 La entrada FML Z 60 Hz se publicó primero en Lifasa.

]]>

Standard Power Capacitor FML Z 60Hz

Self-healing capacitors with low losses metallized polypropylene dielectric without  impregnant liquid. Mounted in rectangular sheet steel plate enclosure having discharge resistors connected to the terminals, which are protected by the cover.

These capacitors are especially suitable for the individual compensation of inductive loads and the construction of capacitor banks.

Rated voltage 230 … 1000 V
Frequency 60 Hz
Dielectric Polypropylene
Discharge resistors Built-in
Dielectric losses ≤ 0.2 W/kvar
Total losses ≤ 0.4 W/kvar
Maximum overvoltage 1.1 Un
Maximum overcurrent 1.3 In
Insulation level 3/15 kV rms
Power tolerance -5 / +10%
Climatic range – 40/ +55ºC
Connection M10
Degree of protection IP41
Colour RAL 7035
Standards IEC 60831, EN 60831

Other powers, voltages and frequencies on request.

File Language Date Size
Datasheet 04/01/2019 0.1 MB
Manual 04/01/2019 0.06 MB

PRISMATIC CAPACITOR TECHNOLOGY

LIFASA capacitors are manufactured using the most advanced technologies, coming from an in depth knowledge of the manufacturing process and also from very strict laboratory and R+D tests. The enormous experience in installations, acquired over many years, allow us to incorporate in the new design the necessary characteristics to optimize the use of the product. Capacitors are composed of capacitive elements wound from low loss polypropylene film. This dielectric is vacuum metallized, what gives it an excellent self-healing characteristic (MKP). Elements are covered with a thermo hardening resin of high dielectric properties and are not oil filled. Elements are connected to obtain the required reactive power and are mounted in steel cases. Void spaces between elements and the case are filled with a non-flammable, inert and non toxic material. Each element is individually protected. This construction system avoids any risk of explosion of the capacitor and meets all the tests specified in the IEC 60831-1 and IEC 60831-2 standards.

ADVANTAGES

  • Capacitors are dry type and consequently ecologically safe: there is no possibility of impregnating liquid leakage.
  • Losses are specially reduced: lower than 0.05% (< 0.5 W/kvar).
  • Capacitors are a self-healing type: in case of a dielectric breakdown, due for example, to a transient overvoltage, the self-healing mechanism vaporizes the metallic electrode around the breakdown point, allowing the capacitor to go on working normally.
  • Their weight and volume are very low, allowing them to be installed everywhere without problems.
  • Capacitors use strong terminals that guarantee a fast and safe connection.
  • Capacitors, cover with their different series, a wide range of power and voltages to satisfy the most varied requirements.

Contact us if you need more information

[contact-form-7]

La entrada FML Z 60 Hz se publicó primero en Lifasa.

]]>