Capacitor with fuse and contactor CAB
CAB series are formed by connecting a POLB or FML three-phase power factor correction capacitor to HRC fuses, contactor, fast discharge resistors and limiting inductances. Control can be done by an external signal through a terminal block or by an on/off switch included in the equipment.
These capacitors are specially designed for the individual compensation of transformers, hoisting motors equipments and motors with star/delta starter or electromagnetic brake.
Accessories: Automatic controller
| Rated voltage | 230 … 440 V |
| Frequency | 50 Hz – 60 Hz |
| Capacitor (Type 1) | POLB (only enclosure) |
| Capacitor (Type 0) | FML |
| Discharge resistors | Fitted |
| Max. overvoltage | 1.1 Un |
| Max. overcurrent | 1.3 In |
| Insulation level | 3 kV rms / 15 kV cresta |
| Temperature range | – 40/ +55ºC |
| Terminals | M10 |
| Colour | RAL 7035 |
| Standards of fuses | IEC 269, IEC 60269-1 |
| Standards | IEC 60831, EN 60831 |
Other powers, voltages and frequencies on request.
| File | Language | Date | Size |
| Datasheet |   |
07/01/2019 | 0.1 MB |
| Manual | |
07/01/2019 | 0.06 MB |
