Reactor for standard capacitor bank INA/INR 400V 50Hz 7%
INA/INR reactors are designed to work in supply systems with a high level of harmonic distortion in such a way that they allow a safe and reliable service of the power factor correction equipments.
Reactors are connected in series with power capacitors, forming a resonant circuit conveniently detuned, so that, the whole unit has an inductive impedance at the frequencies of all harmonics in the installation. These reactors are specially designed to work in series with FMLF capacitors.
|Rated voltages of the main||440 V|
|Filter type||Low tuning|
|Resonance frequency||189 Hz (7%)|
|Inductance tolerance||± 3%|
|Maximum harmonics overload||0.35 In|
|Thermal protection||By thermostat|
|Insulation level||3 kV|
|Connection||INA: Aluminium Bus Bar|
INR: Terminal block
|Degree of protection||INA:IP00/INR: IP 20|
|Category of temperature||F Class (155ºC)|
|Max. winding temperature||(120ºC)|
|Standards||IEC 60076-6, EN 60076-6|
Other powers, voltages and frequencies on request.